Choosing a pair of haircutting shears is not an easy task. This is especially because your choice can make or break your desired haircut. Choose the bad haircutting shears, and you get a messy, uneven finish and an unhappy client. But choose the right one, and you get a flattering haircut, a satisfied client, and possibly a new customer. You have a lot of options in the market, but to eliminate the confusion that comes with choosing haircutting shears, take note of the following tips.
- Consider the use. Haircutting shears are classified based on their uses. There are the so-called thinning shears, also called blender or thinner, which are used to give the hair a thin texture. Styling shears, on the other hand, are used to do finer and more detailed cuts. There are also left-handed shears, which are recommended for people who use their left hand in cutting.
- Check the blade. First off, make sure the pair of your choice is stainless steel. A stainless steel is made up of carbon, iron, chromium and other alloys to make the haircutting shears rust- and corrosive-resistant. Hardness also is another factor. A hard metal ensures that the blade stays sharp and efficient for much longer period. Keep in mind, however, that the hardest metal doesn’t necessarily make the best shears. To give you a hint, look for a pair of shears that is labeled 440 Stainless Steel (or Japanese Steel); this has the right hardness and is universally accepted as the best shears for haircutting. Take note also of the length of the blade. If you need to make detailed cutting, you need a pair of shears with short blade. Long blade is used for cutting thick hair and doing slide cutting techniques. Blades are also either beveled or convex. Beveled blades are used to achieve layered and tapered cuts, while convex blades are for making clean and even cuts.
- Take note of the handles. There are generally two kinds of handles: even and offset. Even handles have finger holes in the same size. Older shears usually have even handles and are used by older stylists. Offset handles are said to be more comfortable to use than even handles, primarily because the thumb hole is slightly smaller than the finger hole. Not only are they easier to use, they also promote a smoother movement of the hands.
- Keep the price in mind. As far as haircutting shears are concerned, a cheap price generally equates to inferior quality. This is why experts recommend buying high-end haircutting shears. The initial cost might be quite high, but it can guarantee you a pair of shears that can last for years. Compare this to an inferior pair that is likely to retire after a few months and should be replaced with a new one. As you go about your career, you should have a shears collection to help you achieve different hairstyles, and replacing a malfunctioning pair one after the other just doesn’t help your collection grow.
Be very finicky when choosing a pair of haircutting shears. Remember that a poor pair is likely to cause split ends, requires frequent sharpening, and might put your reputation on the line.