A jersey display case is an excellent way to display an autographed jersey or other piece of sports memorabilia. A jersey case purchased through a sports collectible store will often cost over $100, which in many situations will cost more than the actual jersey that is being displayed. To save some money, almost anyone can build their own personal jersey display case. This article will give you the steps needed in how to build a jersey display case.
The first step in how to build a jersey display case is to design your display case. To properly do this, you will need to know the dimensions of your jersey when it is laid out. For an NFL football jersey, a display case should be at least 36 inches long and 30 inches wide. The display case for other sports jerseys may vary slightly, but will be roughly the same size.
The next step in how to build a jersey display case is to gather supplies. Building a jersey display case requires plywood, 2x4 hardwood, a hammer, small nails, Plexiglas, small pins, and hooks.
The next step in how to build a jersey display case is to cut the wood. You will need to cut the plywood to meet the dimensions of your design. The hardwood will need to be cut so it forms a border along the outside of the plywood. Eventually, the Plexiglas will sit on top of the hardwood to form the case. Since the plywood provides the base and background of the jersey case, some people like to paint it to better match the jersey.
After the wood is dry, the next step is putting the case together. You will want to nail the four pieces of hardwood into the plywood by using a hammer and inserting the nails through the plywood into the hardwood. After building the frame, the next step in how to build a jersey display case is to lay and center the jersey. Using pins to keep the jersey in place lay the jersey in the center of the case. Be sure there are plenty of pins for support, because if too much weight is placed on one pin, it could cause a tear.
After setting the jersey, the next step is installing the Plexiglas. If the glass does not fit the case frame, you can cut the glass to make the dimensions perfect. You can apply the Plexiglas to the frame using a hammer and nail.
The last step in how to build a jersey display case is applying some hooks to the back of the case. Be sure the hooks are even, as they will be used to hang the case on the wall.