Summer would not be as enjoyable as you perceived it to be without air conditioners. Imagine yourself stuck in your house without something to keep you from the extreme heat. During ordinary days, air conditioners may help maintain the good circulation of air in your room, thus, maintain the balance of air heating and air-cooling. Air conditioners, bearing an important role in making your life more comfortable should be well-taken care. However, if your air conditioners need repair, knowing some air conditioning troubleshoot tips can be very helpful and may save you from spending much in the air conditioning trade. Nevertheless, if your air conditioner’s damage becomes out of control that is the time that you call a technician to handle the problem.

Here are ways to repair your air conditioner:

1.    What should you do if the condenser malfunctions?

Cause: Power failure
What to do: Check the fuse or the circuit breaker. If you noticed that the fuse or the circuit breaker is damaged, replace it. 

Cause: Thermostat is improperly set
What to do: Adjust the setting at 5o.

Cause: Motor and compressor malfunctioning
What to do: Seek the help of air conditioning and/or refrigeration technicians.

2.    What should you do if the cooling systems do not function well?

Cause: Irregular cooling due to imbalanced circulation system
What to do: Try to maintain a balance in the heating and cooling system.

Cause: Insufficient cooling due to dirty evaporator
What to do: Try to clean the air conditioner’s evaporator.

Cause: Size of the units is not congruent to the size of the room or the house
What to do: Seek the help of the professional technicians.
               : Replace your units to bigger ones.

Cause: Cooling system does not totally function due to problems in the refrigerant system
What to do: Avail the service of the technicians.

3.    What should you do if the condenser voluntarily shuts down and restarts?

Cause: Air conditioners’ condenser is soiled
What to do: Carefully clean the air conditioners’ condenser.

Cause: Air conditioner’s evaporator is grimy
What to do: Make sure that you clean the air conditioners’ evaporator.

Here is a course of action on how to fix your air conditioning ducts:

  1. Check the exact location of the damage. Most of the air conditioning ducts are damaged in the middle section although there are cases, in which air conditioning ducts are damaged while joining some sections. Damages can also be gained from loose ducts. This is not applicable for ductless units.  If you noticed that you have a loosed air condition duct, press it onto the link.
  2. The next thing to do is to clean the area where the damage is found. You may do this by using paper towel or cloth.
  3. Using your brush, apply a sealant to the damage. Make sure that you use a water-based sealant to coat the damaged area. After the application, wait for five to ten minutes.
  4. If you noticed that the sealant application is already dried, cover it with a mastic tape. Ensure that you cover the completely coated area with the tape.
  5. Leave it for ten minutes. Test your air conditioner. Leaking air is a signal that you have to repeat the above-mentioned steps.

You may use any of the above tips. Remember that if you cannot handle the damages, the air conditioning technicians are only few calls away.

Average rating: