Installing surveillance cameras around the house or a business establishment adds protection and sense of security for everyone. There’s no question about how helpful this tool is. But there is no doubt also that natural weather changes like wind, snow, rain, and extreme heat can all disturb the effectiveness of surveillance cameras. Videos might not be taken properly or the camera might stop working normally. Weatherproofing your surveillance camera, especially those installed outside, is as important as having the device.
It’s quite easy and common sense to weatherproof surveillance cameras. The following tips should help you have some ideas on how to do it:
- Decide on the best spot for surveillance cameras. Prioritize the camera’s function over its safety against weather changes. After all, you’ll make a way to weatherproof the cameras later. Still, consider the basic like the camera should be not so obvious and should be installed high enough to prevent any tampering.
- Shade the area. Installing the surveillance cameras in a shaded part will already help it be protected against the changing weather. If this shaded area is not available, then simply make one for the camera. A small extension of the roof or installing a special roof, big enough for the camera’s panning, will already do the trick.
- Use weatherproof surveillance cameras. You’ll worry less about weatherproofing the cameras if you buy the weatherproof variation in the first place. These may be more expensive but the cost will be worth it. These cameras can withstand rain, snow, wind, and other weather disturbances. It’s best to read the features of the surveillance camera to familiarize with its weatherproof capabilities.
- Install it as stable as possible. Prevent the cameras from falling because of strong wind by using strong screws when installing them. Securely attach the cameras as well on a strong wall for better mounting.
- Use weatherproof wiring. Wirings needed by the cameras are not typically included in the package. It’s best that you choose the weatherproof variety. You don’t want to weatherproof the cameras only to find out that a non-weatherproof wire ruined the camera. Better be sure with a better wiring.
- Install wires properly. So you already have installed weatherproof wiring for the cameras. Give extra protection for the wires by protecting it against accidental cut. Use strong overhead protective casing around the wires.
- Consider using a weatherproof housing. If you can’t afford to buy new surveillance cameras, then you can settle with your old non-weatherproof cameras. Get weatherproof housing for them, though. This should already protect the cameras against weather disturbances.
- Use amplifier. This will extend the area for transmitting data from a wireless surveillance camera. This way, you don’t have to buy a new camera. Simply enhance your old one and enjoy its benefits more.
Humans can never control weather disturbances like extreme snow storm, hurricanes, or extreme heat. But at least, you can do something to prevent any harsh effects from these inevitable circumstances. Weatherproofing your surveillance camera is a good way to prevent your cameras from these harsh effects.