How To Mix Cement

Knowing how to mix cement always comes in handy. You will find a lot of simple to complicated projects at home that will need this kind of skill. Hence, if you don’t know how to mix cement yet, it is about time for you to learn this craft. Whether you have an upcoming project or not, it is important for you to know how you can properly mix cement. Sooner or later, you will find this helpful.

A mixing task is not as easy as putting altogether sand, cement, and water. This process requires a little more skill and understanding before you can call it a success. Take note that a little mistake in even just the right proportion of sand or cement can ruin whatever your project is. To help you in properly mixing cement, here is an easy-to-follow guide for you:

  • Prepare the materials needed.  There are already pre-mixed cements that you can purchase in the market. You only need to pour water in them. However, for this guideline, the steps will refer to mixing concrete starting from scratch. Hence, prepare the necessary materials such as cement, gravel, and sand. The exact proportion for these three ingredients must be one part cement, two parts sand, and three parts gravel. If you will not be adding gravel, the right ratio is one part of cement to three parts of sand.
  • Determine the quantity of cement that is subject for mixing. Cement can be mixed in a bucket, piece of plywood, or in a mixer. This will depend on the quantity of mixture you will be preparing for a specific project. For larger projects, it is best to rent a mixer for the purpose. Otherwise, mixing the cement in a plywood or bucket using a shovel is perfect.
  • Mix dry ingredients. Mix the sand, gravel, and cement thoroughly. Include any other dry ingredient that you wish to include in the mix depending on the kind of project you are working on.
  • Add water in small quantities. Do not be tempted to give a splash of water to the dry mix. Add water in very small quantities and mix it in between adding water. Add just enough water to come up with a mixture that is not too dry or too wet. Though there is no rush in mixing, keep in mind that the mixture will eventually dry. Therefore, you must be sensitive of the time when doing this job.
  • Test the mixture. Scoop a pile of mixture using a shovel and then flatten it up. Use the shovel’s tip to make several ridges from the flattened mixture. If the ridges appear to be ragged, the mixture is too dry. In any case that the ridges fill in, the mixture is too wet. Add water or cement depending on the consistency of the mixture.

It does not need too much skill to mix cement. However, it requires patience and practice to perfect the proper execution of the task. Keep in mind that you cannot afford to make mistakes in the mixing process. Since the success of whatever project you are doing depends on the quality of your cement mixing job, you better be perfect in this craft all the time.


Share this article!

Follow us!

Find more helpful articles: