Arc welding refers to the procedure that makes use of the intense heat of an arc that is electrically powered. The welder links metal by the union of the parent metal and another metal; the union will consequently create a joint.
A filler material usually protects the area that is being welded. This procedure is generally utilized since it costs less and is typically the first thing an apprentice welder learns. If you are planning make use of this, here are the guidelines on how to use an arc welder.
- Get ready to weld. You should find an area to practice on which is spacious enough and does not have any combustible materials around. A good area would be outdoors. Securely position the steel you will be practicing on to your work stand. Fasten the steel to the ground and position the welding rod on to the clamp.
- Wear your protective outfit. Do not forget to also put on a helmet to protect your eyes. If you are unprotected with a helmet, there is a big chance that you will immediately incur permanent damage in the eyes due to looking at or watching the arc.
- Switch on the welder. Situate it to run at around 80 amps. Let the electrode touch the steel and ever so gently draw it back a little. Move it completely away and test it again if it still sticks. If it still sticks and does not easily break loose, boost the amperage a notch.
- Put the electrode into the arc to sustain it. You will be able to hear a certain crackling noise if it is at a suitable space between it and the metal. The most suitable distance is typically around ¼ of an inch.
If it is too far from the metal, the arc welder will produce more of a bursting noise and have sparks fly all over the place. On the other hand, if it is too near to the metal, the electrode will stick.
Practice this whole procedure on a piece of metal first before using it what you actually want to work on. After getting used to this, you may now try welding one piece of metal to another piece.
The steps laid out here might sound moderately easy, but it may be a little more difficult when putting it to practice. It is always ideal to have someone who is already good at this supervise what you are doing to make sure that you handle the arc welder properly.
You have to be very careful and take a lot of precautions when carrying out an arc welding. In addition to that, be sure that your whole body and face are well-protected. Wear the proper gear for this type of procedure.
You may also have the choice having someone demonstrate this to you first before doing it yourself. You can find a lot of video demos of this on the Internet. It will help you a whole lot.
Add comment