Many people are easily intimidated by do-it-yourself electrical projects. In this video, learn the basics of how electricity works in your home. You'll be surprised to discover that many simple wiring jobs are not as difficult as you might think.

Video Transcription

When it comes to electrical work, many people are little bit intimidated. But once you learn a little bit about electricity, you will see that several wiring jobs are just not that difficult. Let us start by taking a look on how the electrical system works in your home. Power flows from your service provider through a series of high voltage wires, transforms as reduce the current to 120 volts as it enters into your house. At the service head, a meter records the amount of power you use, and routes it to the house of the electrical box. This is the north center of your home. The circuit breaker box is usually in the basement, garage, or some out of the way in. You may also have a sub-panel with the main panel, and it does not have enough room on what you need. In most homes, service contain with three whites, two hot and one neutral. Each hot wire contains 120 volts. Whereas to the main settle and down the bust floor spreading the link of the main panel. Individual circuits connected to one of these bars, supply the 120 volts current to the switch in the outlet in your house. Each circuit is connected by a circuit breaker, which switch and stopping the flow, if the circuit becomes overloaded. Electricity travels in a loop or a circuit. Once the circuit is broken, it will do a circuit breaker, a switch or something sorting out the current series. The current and these two hot wires, it is usually either a black or a red, and in terms to a mix of wire, typically white. Most of systems you lay the ground wire usually the green or bare copper. This is connected to each of one service panel, which is directed on the path to the ground . When an overload happens and a breaker is strip, the current is discharge. A number of switches in an outlet, will be connected to the circuits in your home. Although some are heavy-used items, such as the; refrigerator, it may have its own dedicated circuit. The current is carried by insulate copper or aluminum wires throughout your house. The larger the wire, the more current or amps they can carry. If a wire uses more amps than it is really poor it will overheat. That is why a properly rated circuit breaker is so important. A switch completes the circuit when it is turn on, and in a rough sequence when it shuts off. You may have some different kinds of switches in your house, such as dimmers, motion defenses and three-way switches. A standard grounded outlet is designed to carry 15 amps. It has one flat wire than the others, so I will put can only be inserted in one way. This is the safety pitcher that prevents power from running through an appliance, even when it is switched off. GSCFI outlet sits down the power immediately if they detect the slider is exchanging in current flow, and I will some kitchens, bathrooms and outdoor areas. Once you got the basics down. You will see that electrical work is really quite easy. You just follow the proper instructions for wiring your device and always make a secure connections using wire knots or electrical tape.