How To Fix a Broken Window Seal

A broken window seal is evident when you see constant condensation and fog on your window glass panes regardless of the temperature or weather in and outside of your house. Most seals are pretty sturdy and strong. It is quite hard to remove a broken seal from the window. It would usually take up to 20 years before the seal fails on you. However, if your house is relatively new and you already notice some foggy windows, painters or carpenters that built the house may have accidentally wielded it causing the seal to melt and become brittle. Fixing it can be a tedious job but it is not at all impossible to do. Here’s how.

  1. Carefully remove the window from its frame. You can easily do this by simply lifting it up and gently sliding it out. Just make sure that the window is not attached by screws, so it is important that you double check the sides and inner frames just to be sure. If it is screwed in, just unscrew it using an appropriately sized screwdriver.
  2. Look for a professional window glasscutter or glazier in your area. Never cut the window all by yourself. You need an expert to do this for you. If you are having difficulties in finding a glasscutter, you can go to the nearest window retail shop and ask where you can hire a glazier. More often than not, they will be able to give you a couple of good glasscutters that can readily help you.
  3. If you want to do this by yourself, you can just install a brand new glass. Take the window frame apart and accurately measure the sides. Bring the measurements to your local window shop and give it to the salesperson in charge. Purchase a new glass by strictly referring to the size. Go home and reassemble the window frames around the new glass. This should fix the window seal.
  4. If you are living in a warm climate, you might not need to fix the window seal at all. As a matter of fact, the extra breeze seeping in the sides of your window can help alleviate the humidity and hotness that you are experiencing. Having a broken window seal or two will definitely not be a problem for you.

If you find this procedure quite difficult for you to handle, do not hesitate to call a professional to fix it for you. Do not force yourself or else, you might do more damage to your windows and you might end up spending more money than you should. It is also very important that you always use protective gears such as gloves and goggles. This way, you will not have to worry about unnecessary accidents that may come your way. Be prepared at all times and make sure that use the proper tools when doing this. Just follow these effective steps and you will soon be on your way to a perfectly sealed window. Good luck!


Share this article!

Follow us!

Find more helpful articles: